This command power cycles the device and breaks its normal boot sequence. Then it replaces its configuration with the last stored current one.
This command requires power control and is only available for Cisco routers running IOS or CatOS, and Cisco switches running CatOS.
CLI resource: port
Device makes: Cisco
Lantronix Local Managers: All
LMS offerings: All
[admin@LantronixLM (port1/1)]# recover configuration Attempting to revert startup configuration to current from 14 Aug 21:57 Powering off outlet(s) [1, 2] DSR was active. CTS was active. CTS is still active. Powering on outlet(s) [1, 2] Serial link is active. Attempting to break into ROMmon mode. Break into ROMmon successful. Reading post Image decompressing Image decompressed Post complete.
1.1 - This command was introduced; it replaces recover password.