This document details the installation of a remote antenna kit with the Lantronix LEO-I Kit (Revision 3).
The remote antenna kit should contain:
1. Connect the cable of the GPS antenna to the external side of the N-type connector at the bottom of the ADU.
2. Connect the LMR-195 cable to the Iridium antenna. Connect the opposite end to the larger N-type connector at the bottom of the ADU.
3. Mount the antenna in the desired location. Use the circled holes in the below picture to attach the antenna to the mounting bracket with the screws provided.
4. Unscrew the bottom cap of the GPS antenna and thread the wire through the top of the mounting bracket. Thread the cap through the end of the wire and screw back on and mount in desired location.
Assembled antenna kit: