Lantronix welcomes Uplogix! Learn more here.

Remote Antenna Kit (Revision 3)

Updated March 9, 2021. Written for LMS Version 6.2.

This document details the installation of a remote antenna kit with the Lantronix LEO-I Kit (Revision 3).

Unpack the Kit

The remote antenna kit should contain:

  • Iridium antenna
  • 10 ft LMR-195 cable
  • GPS antenna with fixed 10 ft cable
  • Mounting bracket (2)

Install the antennas

1. Connect the cable of the GPS antenna to the external side of the N-type connector at the bottom of the ADU.

Remove Existing Antenna

2. Connect the LMR-195 cable to the Iridium antenna. Connect the opposite end to the larger N-type connector at the bottom of the ADU.

Attach SMA Cable

3. Mount the antenna in the desired location. Use the circled holes in the below picture to attach the antenna to the mounting bracket with the screws provided.

Mounting Screw Holes

4. Unscrew the bottom cap of the GPS antenna and thread the wire through the top of the mounting bracket. Thread the cap through the end of the wire and screw back on and mount in desired location.

GPS Antenna

Assembled antenna kit:

Wiring Complete Unit

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2024 Lantronix, Inc. All Rights Reserved