Lantronix welcomes Uplogix! Learn more here.

Modifying Device Configuration After Initial Setup

Updated March 9, 2021. Written for LMS Version 6.2.

The settings configured with the config init command can be updated at any time after you set up the port (refer to Initializing Ports) through the use of additional commands.

command description
config authentication Change authentication settings for the device, including Console/Enable usernames and passwords.
config device logging Configures logging settings for the port.
config info Configures description, make, model, OS, OS version, management IP address and dedicated Ethernet IP address.
config serial Configures serial settings.

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2023 Lantronix, Inc. All Rights Reserved