Lantronix welcomes Uplogix! Learn more here.


Updated May 18, 2022. Written for LMS Version 6.2.

Monitors console port activity and determines if the device is in an unresponsive state, cycling the power of the device to recover the device in the least amount of time. The time argument defines the amount of time the console must be unresponsive before the Lantronix Local Manager cycles the power on the device.

This command checks for power control mappings and schedules an intelligentReboot job.

Command availability

CLI resource: port

Device makes: Cisco

Lantronix Local Managers: All

LMS offerings: All


autorecovery [delay]

[delay] is in seconds.


The autorecovery command requires power control to function. If there is no power outlet mapped to the device, autorecovery will not operate.

[admin@LantronixLM (port1/1)]# autorecovery 120
Job was scheduled 9: [Interval: 00:02:00] intelligentReboot



Related commands


Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2024 Lantronix, Inc. All Rights Reserved