This command invokes the packet capture ability of the Lantronix Local Manager. The secondary Ethernet port can be configured to monitor a SPAN port of a switch and capture packets matching a variety of conditional statements. Only the packets destined for the secondary Ethernet port meeting the regular expressions defined in the conditional statements are captured.
A single capture is available to view in text mode or it can be transferred to another system in text or pcap form.
The capture will spool up to 5 MB of capture detail.
Use the config system secondary command to enable capture mode. If capture mode is not enabled, an error message will be displayed when trying to use the capture command.
[admin@LantronixLM]# capture Capture is not currently enabled. To enable use 'config system secondary'. [admin@LantronixLM]# config system secondary --- Existing Values --- Type: bonded Bonding Link: yes [E1] Primary Ethernet Link: yes (bonded active) [E2] Auxiliary Ethernet Link: no (bonded) [E3] Internal SFP Ethernet Link: no (bonded) Change these? (y/n) [n]: y --- Enter New Values --- Type [bonded]: capture speed/duplex [auto]: Warning: Remote connections may be lost if you commit changes. Do you want to commit these changes? (y/n): y
usage: capture [options] --- options --- -size <arg> [integer] capture -size 1514 Expressions: host 10.10.10.10 | net 10.10.10.0/24 | port 80 capture host 10.10.10.90 and port 80 or 443 Direction source or destination src or dst | src | dst | src and dst capture src 10.1.1.1 and dst port 80 and 443 or 8443 Protocol: ip | Ip6 | icmp | arp | udp | tcp [portrange] | vlan capture ip6 -size 1514 src 2001:470:b851:10:0:0:0:19 and dst port 80 capture tcp dst portrange 20-21 Packet size: greater | less capture greater 1024 capture less 68
[admin@LantronixLM]#capture ip6 -size 1514 src 2001:470:b851:10:0:0:0:19 and dst port 80 Press 'x' or Ctrl+C to stop capturing packets. 64 bytes Capture stopped.
4.4 - This command was introduced