Interactive command that steps you through the changes needed to update the Lantronix Local Manager's settings used to communicate with the network device.
CLI resource: port, powercontrol, modem
Device makes: All
Power controllers: All
Lantronix Local Managers: All
LMS offerings: All
The configuration choices presented depend on the device and on the model of Local Manager you are using. Dedicated Ethernet options require a dedicated Ethernet module.
If no hostname is available, first word of the description will be used as the device's hostname, and will be displayed on the front panel and Dashboard.
Note: Some symbol characters, such as the ~ and \ characters, may not display correctly on the front panel display.
[admin@LantronixLM (port1/1)]# config info Hostname: Description: tasman6300 Make: tasman Model: 6300 OS: tios OS Version: Management IP: DHCP Enabled: true Dedicated Device IP: 169.254.100.2 Dedicated Port IP: 169.254.100.1 Dedicated Subnet: 255.255.255.252 Dedicated Speed/Duplex: auto:100full Change these? (y/n) [n]: y --- Enter New Values --- description: [tasman6300]: make: [tasman]: model: : os: [tios]: os version: : management IP: : configure dedicated ethernet port? (y/n) [n]: y Use DHCP? (y/n) [y]: n dedicated device IP [169.254.100.2]: dedicated port IP [169.254.100.1]: dedicated netmask: [255.255.255.252]: speed/duplex: [auto]: Do you want to commit these changes? (y/n):
description (optional) - Used to identify the device if no hostname is found.
make (required) - Type ? to see a list of supported devices. If your device is not listed, enter native.
model (optional) - Automatically discovered during assimilation of supported devices.
os (required in most cases) - Type ? to see a list of supported OS types. This list is filtered based on the make.
os version (optional) - Automatically discovered during assimilation of supported devices.
management IP - Required if Ethernet-based functionality is desired. This is the regular IP address of the device and not related to the dedicated Ethernet between the Lantronix Local Manager and the device.
configure dedicated Ethernet port? - Required if dedicated Ethernet functionality is desired. This network must be unique across all device ports on the Local Manager.
Note: If you configure a dedicated Ethernet port on a switch, set the switch to use DHCP or configure the STP portfast feature on the layer 2 interface to improve performance.
Use DHCP? - Specifies whether the device requests a DHCP address from the Local Manager series Local Manager. This command is presented only if a dedicated Ethernet port is installed.
Note: If you configure the device to use DHCP, ensure that the Local Manager is configured to serve DHCP addresses to managed devices. Use the config system protocols DHCP command to change the default (169.254.100.x).
dedicated device IP (required) - IP address of the device's Ethernet interface.
dedicated port IP (required) - IP address of the port's Ethernet interface.
dedicated netmask (required) - Subnet mask for the dedicated Ethernet. Each port must be on its own subnet.
speed/duplex (optional) - Defaults to auto but can be changed to suit your network.
1.06 - Ethernet Link negotiation was added.
2.5 - Command now available on modem resource.
3.2 - Changed make "Generic" to "Native".
3.4 - Added "Use DHCP?" prompt.