Lantronix welcomes Uplogix! Learn more here.

config serial

Updated March 1, 2022. Written for LMS Version 6.2.

Interactive command to specify serial console connection settings for a network device. To configure the Lantronix system's management console port, use the config system serial command.

Command availability

CLI resource: port, powercontrol, modem

Device makes: All

Modem: All

Power controllers: All

Lantronix Local Managers: All

LMS offerings: All


config serial

This command is available from terminal pass-through as ~s


The option to test the new settings is presented before the commit dialog.

The test option is not presented if called using ~s.

[admin@A505100087 (port1/1)]# config serial
Serial Bit Rate: 9,600
Serial Data Bit: 8
Serial Parity: none
Serial Stop Bit: 1
Serial Flow Control: none
DSR: false
CTS: false
RX : 0
TX : 0
Frame Errors: 0
Overrun Errors: 0
Parity Errors: 0
Breaks: 0
Change these? (y/n) [n]: y
--- Enter New Values ---
Serial Bit Rate [9600]: 19200
Serial Data Bit [8]:
Serial Parity [none]:
Serial Stop Bit [1]:
Serial Flow Control [none]:
Do you want to commit these changes? (y/n):



Related commands

  • config system serial
  • show serial
  • show system serial

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2023 Lantronix, Inc. All Rights Reserved