Lantronix welcomes Uplogix! Learn more here.

FBB AT off

Updated March 9, 2021. Written for LMS Version 6.2.

The following rules are designed to comunicate with a FBB unit over a Lantronix virtual serial port. They query the state of the FBB unit for active data sessions, and if they see one for 60 minutes they send a command to shut the data session off.

config rule no fbbCheck
config rule fbbCheck
description this rule sends "at+cgact=?" to the FBB at interface and collects the response
action execute -command "at+cgact=?" -pattern "(\D\D\D\D\D\D\D\D\D\D\D\D\D)" -setValue system fbbStatus $1

config rule no fbbOff
config rule fbbOff
description this rule looks for "+CGACT: (0,1)" in the response and turns off FBB after seeing it for an hour
compare-value system fbbStatus = +CGACT: (0,1) :60i
action execute -command "at+cgact=0,1" -pattern "#"
action event GENERIC -a "FBB shut off"
action clearValue system fbbStatus

To schedule this ruleset, run the following command on the FBB's AT port: config monitor chassis fbbCheck | fbbOff :60

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2024 Lantronix, Inc. All Rights Reserved