Lantronix welcomes Uplogix! Learn more here.


Updated February 15, 2022. Written for LMS Version 6.2.

Connect to another Lantronix Local Manager via SSH. This command cannot connect the system to any other host, and it cannot be used to connect to more than one other Lantronix Local Manager at a time.

Command availability

CLI resource: system

Lantronix system: All

LMS offerings: All


connect ["user@"] <"ip/ipv6 address"> ["port"]


If you omit the username, your current login will be used.

When you log out, you are returned to the session from which you connected.

[admin@LantronixLM]# connect
Connecting to
admin's password: ********
Lantronix LMS v5.4 -- Powering Business Uptime

Port     Hostname            Status        Con Eth Uptime   Processor   Last
                                                           Utilization  Alarm
---- ------------------ ------------------ --- --- ------- ----------- -------
 1/1 tasman6300         OK                  *
 1/2 Solaris Build Box                       *      262d 23             118d 20

- Output removed -

Con(sole) or Eth(ernet) link status indicated with '*'
Processor Utilization displayed as last collected, 1 and 5 minute averages
Last Alarm displays time since last Alarm matched.
                  d=day, h=hour, m=minute, s=second



1.4 - This command was introduced.

Related commands


Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2023 Lantronix, Inc. All Rights Reserved