Lantronix welcomes Uplogix! Learn more here.

show slv test

Updated February 16, 2022. Written for LMS Version 6.2.

Displays configured SLV tests. To view test results, use the show slv stats command.

A valid SLV license must be applied to access this command. Licenses are managed on the Lantronix Control Center.

Command availability

CLI resource: system

Lantronix Local Managers: All

LMS offerings: Advanced


show slv test <"testName" | *>


Specify the name of the test, or use * to display all tests.

[admin@LantronixLM]# show slv test *
TCP tests:
slv tcp NextHopRouter
tcpPort 22

HTTP tests:
No SLV HTTP tests were found for '*'.

IPT tests:
slv ipt xyzcoVoip
call type sip
codec g711u
destination ip
duration 20
payload harvardmale

In the Lantronix web interface

Inventory > Local Manager page > SLV Stats - specific to this system


2.5 - This command was introduced.

Related commands

  • config slv http
  • config slv ipt
  • config slv tcp
  • show slv stats

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2023 Lantronix, Inc. All Rights Reserved