Interactive command to specify how logging is handled for the network device.
CLI resource: port
Device makes: 3Com, Alcatel, Cisco, Comtech EF Data, HP, iDirect, Juniper, ND Satcom, Netscreen, Nortel, Sun, Tasman, TippingPoint, server
Lantronix system: All
LMS offerings: All
config device logging
This setting may alter the network device's configuration, based on the user's choices at the next assimilation process.
This setting does not remove current syslog configuration from network devices.
[admin@LantronixLM (port1/1)]# config device logging --- Existing Values --- Set the console to use synchronous logging: yes Set the console to use logging buffered: yes Logging level for buffered logging (PIX only): 3 Device buffer polling interval: 30 Clear device log buffer on poll: no Port syslog forwarding enabled: no Change these? (y/n) [n]: y Set the console to use synchronous logging: (y/n) [y]: y Set the console to use logging buffered: (y/n) [y]: y Logging level for buffered logging (PIX only): : Device buffer polling interval: : Clear device log buffer on poll: (y/n) [y]: Enable syslog forwarding? (y/n) [n]: y Syslog server IP: : 18.104.22.168 Syslog port number: : Syslog facility: : local1
Console log and buffer settings: Inventory > group page > System > Defaul Port Settings button - specific to this inventory group
Syslog settings: Inventory > Local Manager page > Port Settings > Logging - specific to this device
2.0 - This command was introduced