Display recent events on this resource. Events are single occurrences that do not have durations.

Command availability

CLI resource: system, port, modem

Device makes: All

Modem: All

Lantronix system: All

LMS offerings: All

Syntax

show events [-g] [-n <#>] [-v]

-g - Show latitude and longitude (only available on ports connected to supported GPS devices). -n <#> - Specify maximum number of events. -v - Use multiple lines

Usage

[admin@LantronixLM]# show events
UTC   Context              Message
----- -------------------- --------------------------------------------------
07/02 admin@198.51.235.145 User completed a terminal session. (No changes were
07/02 admin@198.51.235.145 User completed a terminal session with changes.
07/02 admin@198.51.235.145 User logged out of Local Manager. (Local Manager detected user session
02:41 tasman-6300-ds3      Pull running config completed.
02:41 tasman-6300-ds3      Pull startup config completed.
05:41 tasman-6300-ds3      Pull running config failed.
05:41 tasman-6300-ds3      Pull startup config completed.
08:41 tasman-6300-ds3      Pull running config completed.
08:41 tasman-6300-ds3      Pull startup config failed.
11:41 tasman-6300-ds3      Pull running config completed.
11:41 tasman-6300-ds3      Pull startup config completed.
14:41 tasman-6300-ds3      Pull running config completed.
14:41 tasman-6300-ds3      Pull startup config completed.
15:20 admin@198.51.235.149 User logged into Local Manager.

In the Lantronix web interface

Inventory > Local Manager page > Events - specific to this system

Inventory > Local Manager page > port detail > Events - specific to this device

History

--

Related commands

• show gps events
• show log event