Configures the virtual ports on a Local Manager. Virtual ports are connected via an intermediate console server over a network connection or utilizing a COM port redirector providing the same functionality the hardware versions.
Virtual ports are also used when communicating directly to a managed device on its management telnet port with reduced functionality. Ports may display UNAVAILABLE if the Local Manager cannot establish an RFC-2217 connection to the ip/port.
CLI resource: system
Lantronix system: All
LMS offerings: All
config system slot <1 | 2 | 3 | 4 | modem | powercontrol>
Changing the slot settings may stop communication with a managed device. Slot 4 is reserved for Virtual ports on Lantronix hardware Local Managers
[admin@LantronixLM]# config system slot 1 [config system slot 1]# 1 126.96.36.199 2001 Port 1 added. [config system slot 1]# 2-15 188.8.131.52 2001 Port 2 added. Port 3 added. Port 4 added. Port 5 added. Port 6 added. Port 7 added. Port 8 added. Port 9 added. Port 10 added. Port 11 added. Port 12 added. Port 13 added. Port 14 added. Port 15 added. [config system slot 1]# exit
To remove a port use the [no] modifier before the port number
[admin@LantronixLM]# config system slot 1 [config system slot 1]# no 1 184.108.40.206 2001 [config system slot 1]# exit
Inventory > Local Manager page > System > Virtual Slots - specific to this system
4.4 - This command was introduced.
4.5 - Slot 4 option added for Hardware Local Managers