Interactive command to set the alarm threshold for ambient temperature (32-port Lantronix Local Managers) or for temperature and humidity (older 4-port Lantronix Local Managers). This command is not available for the Lantronix 430, 500, or 5000 Local Manager.
This command configures alarm thresholds for temperature and humidity as observed by a Local Manager. It also enables and disables alarms for power and physical Ethernet connectivity loss.
Temperature and humidity monitoring is available via an add-on module on modern Local Managers.
CLI resource: system
Lantronix system: Local Manager equipped with a temperature / humidity sensor (for temperature / humidity monitoring)
LMS offerings: All
Exceeding temperature or humidity thresholds (if applicable) will trigger alarms. If environmental data is unavailable - for example, if the sensor has not been connected - the corresponding alarm(s) will not be triggered.
[admin@LantronixLM]# config environment --- Existing Values --- Humidity Threshold: 85.0 Temperature Threshold: 95.0 Use Celsius: false Alarm on power supply failure: false Alarm on primary Ethernet link failure: false Alarm on secondary Ethernet link failure: false Alarm on tertiary Ethernet link failure: false Change these? (y/n) [n]: y --- Enter New Values --- Humidity Threshold [85.0]: 75 Temperature Threshold [95.0]: 99 Use Celsius (y/n) [n]: Alarm on power supply failure (y/n) [n]: y Alarm on primary Ethernet link failure (y/n) [n]: y Alarm on secondary Ethernet link failure (y/n) [n]: y Alarm on tertiary Ethernet link failure (y/n) [n]: y Do you want to commit these changes? (y/n): y