Lantronix welcomes Uplogix! Learn more here.

show system pulse

Updated February 17, 2022. Written for LMS Version 6.2.

Displays the Lantronix Local Manager's pulse settings. Pulse determines network connectivity by sending packets to an echo host. The system brings up the dial-up outband network if the pulse fails.

Command availability

CLI resource: system

Lantronix system: All

LMS offerings: All


show system pulse


[admin@LantronixLM]# show system pulse
Use Pulse: false
Pulse Server IP 1:
Pulse Server Port 1: 7
Pulse Server IP 2:
Pulse Server Port 2: 7
Pulse Server IP 3:
Pulse Server Port 3: 7
Enable Out-of-Band on Pulse Failure: yes

In the Lantronix web interface

Inventory > Local Manager > Out-of-Band > Pulse - specific to this system


3.4 - This command was introduced to replace show envoy pulse.

Related commands

  • config system pulse

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2024 Lantronix, Inc. All Rights Reserved