Lantronix welcomes Uplogix! Learn more here.

show system ipt

Updated February 17, 2022. Written for LMS Version 6.2.

Displays the current SLV IPT Listener settings - if the Lantronix Local Manager is configured to answer SIP calls, this command displays what will be reported. To view IPT tests that have been configured, use the show slv ipt command.

A valid SLV license must be applied to access this command. Licenses are managed on the Lantronix Control Center.

Command availability

CLI resource: system

Lantronix Local Managers: All

LMS offerings: Advanced


show system ipt


duration - the length of the recorded message in seconds endpoints - the number of calling numbers permitted. listen - true if IPT Listener is enabled, false if not payload - the test recording selected.

[admin@LantronixLM]# show system ipt
duration 30
endpoints 10
listen true
payload harvardfemale

In the Lantronix web interface

Inventory > Local Manager page > Automation > IPT - specific to this system


3.4 - This command was introduced to replace show Local Manager ipt.

Related commands

  • config system ipt

Not finding what you're looking for?

The LEVEL Technical Services team is standing by 24/7/365 to answer any questions you may have about the installation, configuration, and usage of our products.

© 2024 Lantronix, Inc. All Rights Reserved